Cutting Airway Polishing Wheel Polishing metal surfaces Non-wonven polishing wheel are a commonly used tool for polishing and polishing metal surfaces. Generally, rough polishing is performed on the workpiece.In the rough polishing stage, we use a cutting airway polishing buff wheel to polish the metal surface, and a polishing buff wheel to polish the oxide layer and rough areas on the stainless steel surface to obtain a relatively flat surface. Firstly, we choose a larger nylon wheel, usually a 6-inch or 8-inch wheel, to improve work efficiency. Then, we evenly apply some abrasive on the wheel to ensure that the surface of the wheel is covered with a thin layer of abrasive. Next, we will fix the wheels on the motor shaft, turn on the power, and let the wheels rotate. Then, we use a polishing wheel to place the metal surface under the wheel and gently press it down to make contact with the metal surface. After a few seconds of polishing, we can see that the metal surface beco…